English
 |
Stainless Through Conduit Knife Gate Valve
Model GKT All SS
Size DN100-DN400 ,4”-16”
Material: Stainless Steel, Duplex, Hastelloy, and Titanium ,others
| Quantity: | |
|---|---|
GKT Class150 PN10
GUANLI VALVE
DN100-DN400 4"-16"
Guanli GKT Through Conduit knife gate valves
Bidirectional design which is ideal for installations handling large solids, very viscous fluids, sludge and highly concentrated slurry (mining, paper industry, cement industry, etc.).
The main characteristic of the blade is that it passes through the entire length of the body.
A round outlet is machined in the middle of each blade. This outlet, while falling with identical outlet on the valve body, allows for maximum direct flow of the medium. Thus, while being in open position, the valve essentially becomes part of the piping (leading to dead zones elimination).
Characteristics of through conduit Knife Gate Valve
· Bidirectional wafer type valve
· Knife goes throught the seal area
· Two-piece body
· Circular, total passage: enables a high flow capacity with low load loss
· Sided seal - seal and support ring on both sides
· Interchangeable drives (hand wheel, electric actuator, pneumatic actuator)
Body Material
Stainless steel ,Duplex SS, 904L,HC276,etc.
Standard flange connection:
EN PN 10 and ANSI B16.5 (class 150)
Leak Test
EN 12266-1 leakage Class A for soft seat
Metal Seat without leakage control
Driven types
Manual-Handwheel &Bevel gear
Bareshaft
Electric Actuated
Hydraulic Actuated
Pneumatic Cylinder-Double Acting Pneumatic
Acceissories- Limit switches, Proximate switches, Solenoid, Filter&Regulator,
SS304 Tubes&fittings
Material Options
Knife Material-SS304, SS316, SS2205, Others
Seat Type-NBR,EPDM,FKM, Metal to Metal
Guanli GKT Through Conduit knife gate valves
Bidirectional design which is ideal for installations handling large solids, very viscous fluids, sludge and highly concentrated slurry (mining, paper industry, cement industry, etc.).
The main characteristic of the blade is that it passes through the entire length of the body.
A round outlet is machined in the middle of each blade. This outlet, while falling with identical outlet on the valve body, allows for maximum direct flow of the medium. Thus, while being in open position, the valve essentially becomes part of the piping (leading to dead zones elimination).
Characteristics of through conduit Knife Gate Valve
· Bidirectional wafer type valve
· Knife goes throught the seal area
· Two-piece body
· Circular, total passage: enables a high flow capacity with low load loss
· Sided seal - seal and support ring on both sides
· Interchangeable drives (hand wheel, electric actuator, pneumatic actuator)
Body Material
Stainless steel ,Duplex SS, 904L,HC276,etc.
Standard flange connection:
EN PN 10 and ANSI B16.5 (class 150)
Leak Test
EN 12266-1 leakage Class A for soft seat
Metal Seat without leakage control
Driven types
Manual-Handwheel &Bevel gear
Bareshaft
Electric Actuated
Hydraulic Actuated
Pneumatic Cylinder-Double Acting Pneumatic
Acceissories- Limit switches, Proximate switches, Solenoid, Filter&Regulator,
SS304 Tubes&fittings
Material Options
Knife Material-SS304, SS316, SS2205, Others
Seat Type-NBR,EPDM,FKM, Metal to Metal
